- Medfusion 2010i -

Medfusion 2010i

Medfusion 2010i

The Medfusion 2010i Syringe Pump offers flexibility for a variety of clinical needs, settings and applications. The pump may be utilized whenever meticulous low volume drug or fluid injections using a syringe are required in the hospital.


phone Call for price: (855) 477-8866

Download the operator's Manual

Description

Medfusion 2010i

Here are the specifications of Medfusion 2010i Syringe Pump Repair and Medfusion 2010i service manual. Download medfusion 2010i syringe pump manual.

Overall Size: 4.5″ W X 3.0″ H X 7.5″ L

Weight: 2.5 pounds

Power: AC Adapter, DC Internal rechargeable batteries

Recharge Time: 16 hours (with pump turned off)

Battery Capacity: At 25° C, a 16 hour charge will operate the pump for at least 10 hours at 5.0 ml/hr using a 60 ml syringe.

Accuracy: ± 3%, excluding syringe variations

Infusion Modes: Continuous, Volume Over Time, Body Weight and Mass modes

Flow Rate: 0.01 to 378.0 ml/hr dependent upon syringe size selected

Bolus Delivery: Modes that allow bolus are Body Weight, Mass and Continuous

Syringe Selection:

    • Becton-Dickinson (B-D)® 1, 3, 5, 10, 20, 30, 60 ml
    • Monoject® (Mono) 1, 3, 6, 12, 20, 35, 60 ml
    • Terumo® (Teru) 1, 3, 5, 10, 20, 30, 60 ml
    • Becton-Dickinson Glass (BD-G) 1, 3, 5, 10 ml
    • Abbott (Abot) 50 ml (Abboject)
    • *Automatically senses syringe size (except for B-D 1 cc Luer-lock syringe)

Syringe Fill Volume: All syringe sizes will fill to maximum stated volumes

Total Volume Delivered:

    • 0000 to 9999.9999 MG
    • 00 to 9999.99 ml
    • 0000 to 9999.9999 U
Alarms/Alerts

Alarms/Alerts:
– Near Empty (5 to 60 minutes)
– Empty
– Dose Volume Delivered
– Bolus Complete
– Bolus Delivery
– Occlusion
– System Malfunction
– Low Battery
– Depleted Battery
– Syringe Pops Out
– Invalid Size
– Invalid Number
– Check Clutch
– Alarm Temporary Delay: 2 or 60 minutes
– Alarm Audio Volume: Soft or Loud
– Load Syringe Plunger

Status Alerts (Visual, non-audible):
– Stop/Program
– Deliver
– Battery in Use, Charging and Depleted
– Priming
– Standby Mode
– Back Light

description :

The Medfusion 2010i Syringe Pump offers flexibility for a variety of clinical needs, settings and applications. The pump may be utilized whenever meticulous low volume drug or fluid injections using a syringe are required in the hospital. All medications should be delivered in accordance with their approved drug labeling. The pumps may be field customized for specific applications. A choice of 15 modes of delivery are available. In addition, the pump has the capability to store up to 64 user regimens/protocols.

Features
  • Ambulatory syringe pumps that run on either AC current or rechargeable internal batteries.
  • Four infusion modes: Body Weight, Mass, Continuous and Volume over Time
  • Automatically senses syringe size
  • A bolus may be programmed then changed or administered at any time prior to or during drug delivery
  • May be field customized for specific applications
  • Ability to store up to 64 user regimens/protocols

Related Keyphrase:

  • medfusion 2010i service manual
  • medfusion 2010i syringe pump manual

Download the operator’s Manual

Leave a Reply

Your email address will not be published. Required fields are marked *