- Abbott Plum XL3 -

Abbott Plum XL3

Abbott Plum XL3

The Plum XL3 is a multi-line volumetric infusion system designed to meet the growing demand for hospital-wide standardization. The Plum XL3 houses three independent pumping units, each having a primary line, secondary line, and piggyback fluid delivery capability. The Plum XL3 is suited for a wide range of medical/surgical and critical care applications, offering capability as both a micro device (0.1 – 99.9 mL/hr) and a macro device (1 – 999 mL/hr). Full compatibility with LifeCare® 5000 PlumSeries® administration sets and accessories, and the LifeShield needleless protection systems, makes the Plum XL3 a convenient and cost-effective infusion system.

Features
  • Non-pulsatile volumetric accuracy
  • Microprocessor control
  • Large LCD screen
  • Wide range of standard and specialty administration sets
  • Standard fulfill, partfill, syringe, and vial use
  • Parenteral (blood) and non-parenteral (enteral) fluid delivery
  • Anti free-flow protection
  • Backpriming
  • Titration
  • Individual battery supply for each pumping unit

Call for price: (855) 477-8866

Download the operator's Manual

Description

Abbott Plum XL3

Physical:
  • Dimensions: 13.75″H x 12.2″W x 7.5″D (excluding pole clamp)
  • Weight: Approximately 20 lbs. (with batteries)
  • Casing: High-impact plastic
Electrical:
  • Power: 100-130 VAC, 47/63 Hz, less than 60W
  • Power Cord: Hospital-grade AC cord, 10 feet long, with transparent plug
  • Fuses: 1.0 A, 250 V, Slow Blowing
  • Battery: Three sealed lead-acid rechargeable 8 V battery, internal to the device. Accessible for ease of field replacement with leads and polarized connectors, labeled (A, B, C)
  • Battery Operation: A fully-charged new battery will provide eight hours of operation at 125 ml/ hr, or 1000 ml total volume, delivered per pumping unit.
    • The device should be operated on battery power for six continuous hours at least once every six months for optimum performance and battery life.
  • Recharge Time: If the infusion system is turned to OFF/CHARGE, recharge takes approximately 6 hours. Recharge takes longer if the pumping units are turned on.
    • The battery charges whenever the infusion system is connected to AC (mains) power

Abbott Plum XL3

Delivery Rate Range:
  • Primary, Secondary Mode: 1 to 999 mL/hr (in 1 mL increments)
  • KVO: 1 mL/hr
Dose Limit Range:
  • Primary, Secondary Mode: 1 to 9999 mL/hr (in 1 mL increments)
Occlusion Range:

(Distal): 10 psig (+5, -2 psig)

Leave a Reply

Your email address will not be published. Required fields are marked *