- Curlin 4000 CMS -

Curlin 4000 CMS

Curlin 4000 CMS

The Moog Curlin 4000 CMS infusion pump is an easy-to-use, ambulatory or pole-mounted infusion device designed to meet the needs of the hospital or alternate site patient. It operates accurately in any position, has a low rate resolution of 2 microliters, and its small, compact, lightweight design allows mobility for ambulatory patients. The Curlin Medical pump can be carried in any of the four convenient carryall soft-packs, pole mounted, placed into the locked “safety shells,” or set on a suitable surface for use.

Features
  • Cost effective, safe and easy-to-load disposable Curlin Medical administration sets featuring a unique, spring-activated, self-clamping, set-based “Integral Flow-Stop” device that automatically clamps the tubing when the door of the pump is opened and prevents inadvertent fluid flow.
  • User-friendly, easy-to-teach programming that shortens staff in service time and patient teaching time.
  • Three tamper-resistant lock settings to assist in maintaining patient compliance and safety.
  • Selection by user from three units of delivery, milliliters (ml), milligrams (mg), and micrograms (mcg).
  • Retention of programmed infusion settings until cleared by the clinician.
  • Mandatory requirement of two independent key press actions before a running pump can be turned off, thus minimizing the accidental interruption of a therapy in progress.
  • Audio alarms that can be adjusted from 1 (very quiet) to 9 (loudest) to meet specific patient and clinical setting needs, but that cannot be totally disabled.
  • Retained memory features that allow the pump to easily resume a therapy exactly from where it left off when it is interrupted before completion.
  • Pump will not permit the user to enter any programming value that is outside of its predetermined range.
  • Integral High Upstream pressure alarm to notify user of excessive upstream pressure.
Categories: , ,

phone Call for price: (855) 477-8866

Download the operator's Manual

Description

Curlin 4000 CMS

So here you will be able to find the specifications of the Curlin 4000 CMS and curlin 4000 cms ambulatory infusion pump. Here are the pumping mechanism, dimensions, weight and etc. Download curlin medical pump 4000 cms and curlin medical 4000 cms

  • Pumping Mechanism: Curvilinear peristaltic finger action
  • Dimensions: 5 H x 4 W x 2.5 D in.
  • Weight: 17.5 oz
  • Case Material: UL rated flame-retardant, non-toxic high impact plastic

Operating Temperature:

  • ± 6% Accuracy: 55° to 90°F
  • ±10% Accuracy: 45° to 55°F
  • ±10% Accuracy: 90° to 104°F

Operating Relative Humidity: 15 to 95% non-condensing

Storage Temperature Range: -20° to 140°F

Storage Relative Humidity: 5 to 95% non-condensing

Power Requirements: 2 “C size” Single-Use Batteries or AC Power

Operating Time with Full Charge Batteries:

  • Nominal 10 hours at a rate of 400 ml/hr
  • Nominal 30 hours at a rate of 125 ml/hr
  • Nominal 85 hours at a rate of 2 ml/hr

Internal Memory Battery: 5 years life

Display: Graphic LCD, 4 text fields, 16 characters per field

Flow Rates: 0.1 to 400 ml/hr

KVO Rates: 0 to 10 ml/hr. Can be set at “0” in Continuous, TPN, Variable and Intermittent Therapies

Volume Accuracy:

± 6% for volume delivery >1 ml under the following conditions:

  • Temperature 55° to 90° F
  • Back pressure to 300 mmHg (5.8 PSI)

±10% for volume delivery >1 ml under the following conditions:

  • Temperature 45° to 55°F
  • Temperature 90° to 104°F
  • Back pressure to 750 mmHg (14.5 PSI)

Recommended administration set usage not to exceed 72* hours.

Administration Sets: Proprietary Curlin Medical non-DEHP, PVC administration sets available in different configurations.

Fill Volume for Administration Sets: Nonfiltered microbore sets ± 4 ml. See individual administration set label for specific fill volume

Up Occlusion Detection Time:

Microbore tubing with occlusion below spike

  • <20 minutes at 0.1 ml/hr
  • < 4 minutes at 1 ml/hr
  • <20 seconds at 10 ml/hr
  • <10 seconds at 50 ml/hr

Curlin 4000 CMS

Download curlin medical pump 4000 cms and curlin medical 4000 cms

Pumping Mechanism: Curvilinear peristaltic finger action

Dimensions: 5 H x 4 W x 2.5 D in.

Weight: 17.5 oz

Case Material: UL rated flame-retardant, non-toxic high impact plastic

Operating Temperature:

  • ± 6% Accuracy: 55° to 90°F
  • ±10% Accuracy: 45° to 55°F
  • ±10% Accuracy: 90° to 104°F

Operating Relative Humidity: 15 to 95% non-condensing

Storage Temperature Range: -20° to 140°F

Storage Relative Humidity: 5 to 95% non-condensing

Power Requirements: 2 “C size” Single-Use Batteries or AC Power

Operating Time with Full Charge Batteries:

Internal Memory Battery: 5 years life

Display: Graphic LCD, 4 text fields, 16 characters per field

Flow Rates: 0.1 to 400 ml/hr

Related Keyphrase:

  •  Infusion Pump Repair

Download the operator’s Manual

https://web.facebook.com/infusionpumprepair/photos/a.101426038761773/102739798630397

Leave a Reply

Your email address will not be published. Required fields are marked *