- Alaris Medsystem III 2860 -

Alaris Medsystem III 2860

Alaris Medsystem III 2860

This Multi-Channel IV pump features three independent fluid delivery systems in the space of one compact size. This reduces bedside clutter, simplifies patient transport. It is easy to setup and use, yet provides advanced features and accurate delivery of a variety of fluids.

Features
  • Three independent infusion channels
  • Small, compact size and lightweight design (5.1 lbs.)
  • Set-based, free-flow protection with needle-free access
  • Delivers intravenous, intra-arterial, epidural and subcutaneous applications
  • Infuses a wide range of fluids from various containers, including syringes, utilizing a syringe adapter set
  • Dose rate calculation, single-page programming, a selectable drug library and titration of drugs by the user in either dose or volumetric rate
  • Infuses a wide range of fluids from various containers, including syringes, utilizing a syringe adapter set
  • 6-watts AC power
  • Rechargeable NiCad battery pack memory
  • Non-rechargeable lithium backup battery
  • Delivery rang: 0.1-999 mm/hr
  • KVO rate range: 0.1-20.0 mm/hr

Call for price: (855) 477-8866

Download the operator's Manual

Description

Alaris Medsystem III 2860

Here are some features of Alaris Medsystem III 2860.

Dimensions: 7.875H x 6W x 2.10D

Weight: Approximately 5.1 lbs. includes Pole Clamp

Standards: UL 544, CSA C22.2, No. 125

Case Material: Impact resistant poly carbonate/ABS alloy

Air-in-Line (Default): 500 μl (except for Neonatal device type which is 50μl)

Occlusion Pressure (Default): 15 psi except for Controller Pressure device type which is 3 ft. H20

Operating Temperature: 50-104° Fahrenheit (10° – 40° Celsius)

Transport/Storage Temperature: -4 to +131° Fahrenheit (-20 to + 55°C)

(<95°F or 35°C for optimum battery life)

Rate Range: 0.1 – 999 milliliter per hour (each channel)

Volume Range: 0.1 – 9999 milliliter (each channel)

KVO Rate Range: 0.1 – 20.0 milliliter per hour

Rate Accuracy: 1.0 – 999 ml/hr. ±5% with a standard deviation of 1.96 under specified conditions.

Administration Sets: Use only MedSystem III Administration Sets.

Power Consumption: 6 watts AC power. Use only IVAC MedSystem III AC Adapter, Model 1555 or 1550.

Batteries: Main – Rechargeable NiCd Battery Pack

Memory Back-up – Non rechargeable Lithium

NOTE: Use only approved CareFusion Battery packs.

Battery Charge: A fully charged battery has a minimum of 6 hours running time with all channels running at 125 milliliters per hour and backlight usage of 2 minutes per hour.

NOTE: Replacement of both the main and memory backup batteries must be performed by qualified service technicians.

AC Adapter & Cord Length:

Model 1555, 7.5 Vdc @ 1 Amp with 10 ft. cord.

Model 1550, 8.5 VDC @ 750mA with 8.5ft. (2.59 meter) cord.

Fuses: 3 amp fast-blow internal

Ground Continuity: Maximum 0.1 ohm

Leakage Current: Maximum 100 microamps

Leave a Reply

Your email address will not be published. Required fields are marked *