- Abbott Plum XL -

Abbott Plum XL

Abbott Plum XL

The Plum XL is a dual-line volumetric infusion system designed to meet the growing demand for hospital-wide standardization. With its primary line, secondary line, and piggyback fluid delivery capability, the Plum XL is suited for a wide range of general floor, critical care, and home care applications. Compatibility with LifeCare® 5000 PlumSet® administration sets and accessories makes the Plum XL a convenient and cost-effective system.

  • Large LCD display
  • Volume to be Infused (VTBI) setting
  • Safeguards to protect against over-delivery:
    • Motor speed is continuously monitored
    • Firmware senses malfunctions that could result in gravity flow
  • Volume infused accumulation displays for primary and secondary solutions
  • Non-pulsatile volumetric accuracy
  • Microprocessor control
  • Titration
  • Self-test
  • Simple setup (one hand cassette loading)
  • Automatic memory retention of all previous therapy settings and fluid delivery data, until cleared by user
  • Two-level adjustable alarm volume
  • Runs parenteral (blood) and non-parenteral (enteral) fluids
  • Uses standard fullfill, partfill, syringe, and vial containers

Call for price: (855) 477-8866

Download the operator's Manual


Abbott Plum XL

Here are some features of Abbott Plum XL.

  • Dimensions: Approximately 8.25H x 7.5W x 8.75D inches (including pole clamp)
  • Weight: Approximately 7.75 lbs (with battery)
  • Casing: High-impact plastic
  • Power Requirements: 100-130 VAC, 50 to 60 Hz, less than 35 W
  • Power Cord: Hospital-grade AC cord, 10 feet long, with transparent plug
  • Fuses: 0.5 A, 250V, slow-blo
  • Battery: Sealed lead-acid rechargeable 8 V battery, internal to infusion system. Accessible for ease of field replacement, with color-coded leads and polarized connector
  • Battery Operation: A fully-charged new battery will provide eight hours of operation at 125 ml/ hr, or 1000 ml total volume delivered.
  • Recharge Time: Approximately 16 hours (operating at 125 ml/hr). If the infusion system is turned to OFF/CHARGE, recharge takes approximately 8 hours.
    • The battery charges whenever the infusion system is connected to AC (mains) power
Delivery Rate Range:
  • Primary, Secondary Mode: 1 to 999 mL/hr (in 1 mL increments)
  • KVO: 1 mL/hr
  • Dose Limit Range: 1 to 9999 mL/hr (in 1 mL increments)
  • Occlusion Range (Distal): 10 psi (+5, -2 psi)
  • Occlusion
  • Air-in-line
  • Turn to run
  • Low battery
  • Door/Cassette
  • Set rate
  • Check settings
  • VTBI complete

Leave a Reply

Your email address will not be published. Required fields are marked *