Infus O.R.

The mechanical assemblies of the Infus O.R. Pump are contained within the pump cases and provide two basic functions: Component housing and fluid delivery when a syringe is placed in the pump.


The InfusO.R. Pump is a syringe infusion device that will aid in the administration of many intravenous agents given during anesthetic procedures. It provides for the convenient delivery of narcotics, muscle relaxants, and vasoactive drugs through the SMART LABEL System and is an excellent device for outpatient surgical settings.

Size: 9.2 x 4.5 x 2.0 in
 Weight:  2 lbs (with batteries)
 Syringes:  Monoject® or B-D®; Monoject® or B-D® 20 cc
 Accuracy:  Infusion: linear rate ±3%. Bolus: linear displacement ±3%.
Batteries: Four “C” Alkaline Cells
Battery Life: Typical Use: 150 hours; at low battery and typical use: 4 hours
Operating Voltage: 5-7 volts
Low Battery Voltage: 5.0 Volts (approx.)
Flow Rates: 0-600 mL/hr
Flow Profile: Bolus: Continuous; Infusion: Pulsed Intermittently
Occlusion Force: 8 ± 1 lb.
Maximum Occlusion Pressure: 11 psi with 60 cc syringe; 20 psi with 20 cc syringe
Occlusion Detection Time: 120 seconds at 36 mL/hr (inverse related to flow rate)
Volume Stored on Occlusion: 1.1 mL (approx.)
Back Pressure Effect on Accuracy: None to Occlusion Pressure
  • Modify dose without multiple reprogramming steps.
  • Adjust settings easily at any time during infusion.
  • Change dial settings with a single hand for an immediate response.
  • Save calculation time.
  • Minimize risk of calculation error.
  • Change Infusion Parameters/Rates with SMART LABELS
  • SMART LABELS are magnetically coded/drug specific.
  • Select from the available SMART Label library.
  • Ideal for administering drugs requiring multiple dosage adjustments.