Medsystem III 2860

This Multi Channel IV pump features three independent fluid delivery systems in the space of one compact size. This reduces bedside clutter, simplifies patient transport. It is easy to setup and use, yet provides advanced features and accurate delivery of a variety of fluids.

Description

This Multi­Channel IV pump features three independent fluid delivery systems in the space of one compact size. This reduces bedside clutter and simplifies patient transport. It is easy to setup and use, yet provides advanced features and accurate delivery of a variety of fluids.

Specifications
Dimensions: 7.875H x 6W x 2.10D 
Weight:  Approximately 5.1 lbs. includes Pole Clamp
Standards:  UL 544, CSA C22.2, No. 125 
Case Material: Impact resistant poly carbonate/ABS alloy
Air-­in-­Line (Default): 500 μl (except for Neonatal device type which is 50μl)
Occlusion Pressure (Default):

15 psi except for Controller Pressure device type which is 3 ft. H20

Operating Temperature: 50 - ­104° Fahrenheit (10° - 40° Celsius)
Transport/Storage Temperature:

-4 to +131° Fahrenheit ( -­20 to + 55°C) (<95°F or 35°C for optimum battery life)

Rate Range: 0.1 - 999 ml/hr (each channel)
Volume Range: 0.1 - 9999 ml (each channel)
KVO Rate Range: 0.1 - 20.0 ml/hr
Rate Accuracy:

1.0 - 999 ml/hr. ±5% with a standard deviation of 1.96 under specified conditions. 0.1 - 0.9 ml/hr. ±10% with a standard deviation of 1.96.

Administration Sets: Use only MedSystem III Administration Sets.
Power Consumption:

6 watts AC power. Use only IVAC MedSystem III AC Adapter, Model 1555 or 1550.

Batteries:

Main – Rechargeable NiCd Battery Pack

Memory Back­up – Non rechargeable Lithium

NOTE: Use only approved CareFusion Battery packs.

Battery Charge:

A fully charged battery has a minimum of 6 hours running time with all channels running at 125 ml/hr and backlight usage of 2 minutes per hour. The main battery retains 80% of its capacity after 50 charging cycles, and retains 90% of its capacity after 3 months of continuous AC charging.

NOTE: Replacement of both the main and memory backup batteries must be performed by qualified service technicians.

AC Adapter & Cord Length: Model 1555, 7.5 Vdc @ 1 Amp with 10 ft. cord.
Model 1550, 8.5 VDC @ 750mA with 8.5ft. (2.59 meter) cord.
 Fuses: 3 amp fast­blow internal
Ground Continuity: Maximum 0.1 ohm
Leakage Current: Maximum 100 microamps
   
Features
  • Three independent infusion channels
  • Small, compact size and lightweight design (5.1 lbs.)
  • Set­based, free­flow protection with needle­free access
  • Delivers intravenous, intra­arterial, epidural and subcutaneous applications
  • Infuses a wide range of fluids from various containers, including syringes, utilizing a syringe adapter set 
  • Dose rate calculation, single­page programming, a selectable drug library and titration of drugs by the user in either dose or volumetric rate
  • Infuses a wide range of fluids from various containers, including syringes, utilizing a syringe adapter set 
  • 6­-watts AC power
  • Rechargeable NiCad battery pack memory Non-­rechargeable lithium backup battery