Medfusion 3010 Protege

The Medfusion 3010 Protege syringe infusion pumps are design for use in critical care areas for the administration of fluids requiring precisely controlled infusion rates.

Description

The 3010 and 3010a syringe infusion pumps are designed for use in critical care areas for the administration of fluids requiring precisely controlled infusion rates. Because of the pump’s simplicity and ease of use, this pump can also be used successfully in the non­critical areas of a clinical setting. The only people authorized to setup & monitor any infusion are nurses, physicians, or other health­care professionals with training in infusion therapy and operation of the syringe pump.

Specifications
Dimensions:   10.5” W x 5.1” H x 5.5” D (excluding pole clamp and power cord) 
Weight (pump only):  3.8 lbs. (1.7 kg) 

Accuracy:

Nominal ± 2% excluding syringe variations (for infusion back pressures of 100 mm Hg to +300 mm Hg)

Flow Rate Range (depends on syringe size): 

0.03 to 1130 ml/hr for the Protégé 3010
0.01 to 1130 ml/hr for the Medfusion 3010a

Delivery modes (user customized): 

ml/hr, Body Weight, Volume/Time, Custom Dilution, Mass, Intermittent

Delivery options (user customized):

 Volume Limit, KVO Rate, Bolus Dose, Standby, Loading Dose, Override Occlusion Limit

AC power source:  100­240 VAC, 50/60 Hz, 30VA; Safety Class II – Type CF

External DC power source (Optional):

 External DC Input 6 – 14 VDC, 7 Watts Safety Class II – Type CF (must meet IEC 601­Medical Equipment Standards)

Internal Battery Capacity (at 25°C):

 Rechargeable. 10 hours at 5.0 ml/hr with 60 ml syringe − (from fully charged battery)

User­defined Delivery Libraries:

 Four libraries with 16 profiles per library. One library is “E­-Plates” for rapid setup

 Normal Operating Conditions:

Temperature: 5° to 40° C (40° to 104° F)
Relative Humidity: 15-­95% non­-condensing
Ambient Pressure: 70­-106 kPa (10.2 psia to 15.4 psia)
Infusion Back Pressure: -­100 mmHg to 300 mmHg

Syringe Sizes for 3010/3010a: 

B Braun Omnifix 5, 10, 20, 50 ml Luer Lock
B Braun Perfusor 20 and 50 cc Luer Lock
Becton­-Dickenson (B­-D) 3, 5, 10, 20, 30, 60 ml Luer Lock
Becton­-Dickenson Glass (BD-­G) 2.5, 5, 10 ml Luer Slip
Monoject® 3, 6, 12, 20, 35, 60 ml Luer Lock
Terumo® 3, 5, 10, 20, 30, 60 ml Luer Lock
AstraZeneca® 50 ml pre-­filled Diprivan® Luer Lock

Syringes Sizes for 3010a only: 

Becton­-Dickenson (B-­D) 1 cc Luer Lock and 1 cc Tuberculin
Becton­-Dickenson Glass (BD-­G) 1 cc
Monoject® 1 cc
Terumo® 1 cc

 Alarms/Alerts:
Battery communication timeout Pump is locked
Battery not working Syringe barrel not in place
Battery not charging Syringe flange not in place
Check clutch/plunger lever Syringe plunger not in place
Check syringe flange sensor Syringe does not match library entry
Check syringe plunger sensor Syringe empty
Completing system initialization Syringe empty – manual
Infusion complete Syringe near empty
KVO in progress System advisory – maintenance is recommended
Low battery System advisory – set time and date
Invalid rate for syringe size System advisory – xx data corrupted
Invalid syringe size System failure – aa bb cc
Occlusion – check infusion line Below recommended rate
   
   
Features
  • Indicated for a variety of delivery routes: Arterial, Epidural, Intravenous, Spinal, and Subcutaneous
  • Offers a variety of delivery modes: Continuous, Volume over Time, Intermittent Volume over Time, Mass, Body Weight, and Custom Dilution
  • Can deliver Intravenous solutions, drug solutions, and blood or blood products