Gemstar Blue

Height: 5.5 in. (14.0 cm)
Width: 3.8 in . (9.7 cm)
Depth: 2.0 in. (5.1 cm)

Transport and Storage Environment:

Store in cool and dry environment
Ambient Temperatures: ­-4° to +140° F (­-20° to +60° C)
Relative Humidity: 10% to 90%; non­-condensing

Ambient Temperatures: +41° to +104° F (+5° to +40° C)
Relative Humidity: 10% to 90%; non­condensing
Atmospheric Pressure: 0 - 10,000 ft. (0 - 3,000 m) equivalent pressure

Wall­mount AC mains adaptor;
6 ft. (1.8 m) cord; molded plug
Input: 110 VAC
Output: 3.0 VDC
Tabletop AC mains adaptor; molded plug
Input: 100 ­ 240 VAC
Output: 3.0 VDC

Battery: Two disposable AA, or lithium
Battery Pack: Rechargeable using GemStar® AC mains adaptor

Using two fresh, disposable AA batteries or a charged battery pack, at room temperature, the infuser is capable of delivering approximately:

96 hours at rates below 5 mL/hr
48 hours at rates at or above 5 mL/hr but below 25 mL/hr
24 hours at rates at or above 25 mL/hr but below 125 mL/hr
3000 mL at a rate of 125 mL/hr or higher

Current program and 400­event history log protected by internal lithium battery­-backed memory for at least one year after power is removed 

One 23­-key keypad. Bolus, data port, and AC mains jacks. Bolus button.

Green LED marked with plug icon illuminates continuously when the infuser is connected to AC mains. Green LED blinks when the infuser is connected to external batteries

Red LED marked with alarm icon illuminates continuously for self-­test error alarm conditions Red LED blinks during all alarm conditions which are user-recoverable

The audible alarm is user­adjustable from the maximum volume down to silent. The alarm automatically reverts to the maximum volume if the user does not respond within one minute 

Backlit, four-­line-­by-­sixteen-­character alphanumeric graphics display
Backlight on AC: Continuous
Backlight on Batteries: Continuous during programming, program review, and history display; otherwise activated by keypress or alarm; not activated by bolus request

Port and Interface: RS­-232 serial interface port; minimum baud rate of 2400; isolated circuit
Printers: Seiko DPU 414 or compatible serial printer

± 10% for rates of 0.1 to less than 5 mL/hr. ± 5% for rates of 5 to 1000 mL/hr

ON: Infuser alarms at approximately 0.5 mL of air
Alarms for any bubble greater than 500 microliters with a tolerance of 200 microliters
2 mL: Infuser alarms at approximately 2 mL of air
Alarms when infuser detects 2.0 +1.0/-­0.2 mL of air in 6 mL of total volume delivered
OFF: Alarm is not activated

Distal Occlusion

Low: Alarms when infuser detects distal pressure greater than 7 psi (48 kPa) ± 5 psi (± 34 kPa)
Medium: Alarms when infuser detects distal pressure greater than 12 psi (83 kPa) ± 8 psi (± 55 kPa)
High: Alarms when infuser detects distal pressure greater than 26 psi (179 kPa) + 14 psi (+ 96 kPa)

Proximal Occlusion: Alarms when infuser detects proximal pressure less than or equal to ­-4 psi ( -28 kPa)