CADD Legacy PCA

The CADD-­Legacy® PCA (Patient Controlled Analgesia) ambulatory infusion pump provides measured medication therapy to patients in hospital or outpatient settings. The CADD-­Legacy® PCA pump is indicated for intravenous, intra-­arterial, subcutaneous, intraperitoneal, epidural space, or subarachnoid space infusion. The pump is intended for therapies that require a continuous rate of infusion, patient­-controlled demand doses, or both (such as patient­-controlled analgesia)

Description

The CADD-­Legacy® PCA (Patient Controlled Analgesia) ambulatory infusion pump provides measured medication therapy to patients in hospital or outpatient settings. The CADD-­Legacy® PCA pump is indicated for intravenous, intra-­arterial, subcutaneous, intraperitoneal, epidural space, or subarachnoid space infusion. The pump is intended for therapies that require a continuous rate of infusion, patient­-controlled demand doses, or both (such as patient­-controlled analgesia)

Specifications
Dimensions:​  1.6" W X 3.8" H X 4.4" L 
Weight:​ 0.86 lbs. (13.8 oz), including 2 AA batteries and empty medication reservoir 
Resolution: ​Medication Cassette Reservoir or CADD ™ Administration Set, 0.050 ml per pump stroke nomina
Moisture Protection:​ Splash-­proof (IPX4)
Power:​ Two AA (IEC LR6) alkaline batteries; AC Adapter
Battery Capacity: ​The expected life of 2 AA batteries is 40 hours at 30 ml/hour, or approximately 14 days at 10 ml/day (nominal). It is recommended that 2 new AA batteries be kept available for replacement if necessary.
Accuracy: ​± 6% (nominal). At low infusion rates, this accuracy may not be achieved for short periods. During the total infusion time, the accuracy averages out.
Maximum Infusion Pressure: ​40.0 psi
Maximum Time to Occlusion Alarm:​ 2 hours at 0.1 m/hr; 78 seconds at 24 ml/hr
Bolus Volume at Occlusion Alarm Pressure:​  
Operating Temperature: ​+35°F to 104°F (2°C to 40°C)
Storage/Transportation Temperature: -​­4°F to 140°F (­-20°C to 60°C)
High Pressure Alarm:​ 26 ± 14 psi
Air Detector Alarm: o Single bubble Low Sensitivity: > 0.250 ml
o Single bubble High Sensitivity: > 0.100 ml
o Multi­bubble: 1.0 ml nominal
   
Bolus Accuracy: o At Set Value of 0.05 ml: ± 3.4%
o At Set Value of 20 ml: ± 0.55%
Maximum Volume Infused under Single Fault Condition:  ​CADD™ Administration Set: 0.2 ml.
Delivery Rate during priming:​ Approximately 180 ml/hr
Alarm Disabled during priming:​ Air Detector
PCA Delivery Specifications:   
Reservoir Volume:​ 1 to 9999 or Not In Use; programmable in 1 ml increments, displayed in 0.1 ml increments (Default = 1.0 ml)
Units:  ​ml, mg, mcg (Default is mg)
Concentration: o Mg/ml: 0.1, 0.2, 0.3, 0.4, 0.5, 1, 2, 3, 4, 5, 10, 15,..., 95, 100 (Default = 100)
o Mcg/ml: 1, 2, 3, 4, 5, 10, 15, ..., 95, 100, 200, 300, 400, 500 (Default = 500)
Continuous Rate: ​ 0­-50 ml/hr, 0­500 mg/hr, 0­-25,000 mcg/hr (Default = 0.0 ml/hr)
Demand Dose: ​0-­9.9 ml in 0.05 ml increments, 0­990 mg, 0­4950 mcg
  o Delivery Rate (Continuous + Demand Dose): 125 ml/hr nominal (Default: 0 mg)
Dose Lockout: ​ Default: 24 hours. 5 minutes to 24 hours in the following increments:
  o 1 minute for values between 5 and 20 minutes
o 5 minutes between 20 minutes and 24 hours
Doses per Hour: ​ 1-­12 doses in 1 dose increments (will also be limited by the Dose Lockout value). Default: 1 dose
Doses Given:​ 0­-999
Doses Attempted:​ 0­-999
Volume Delivered: ​0 to 99999.95 in 0.01 or 0.05 unit increments, depending on the units and concentration
Alarms/Alerts:
Low battery power Disposable not attached when run attempted
Depleted battery power Motor locked
Battery dislodged Upstream occlusion
Pump stopped Reservoir volume empty
Pump fault Program incomplete
Low reservoir volume Key stuck
High delivery pressure Disposable detached
Air in line Remote dose cord removed
Features
  • Easy to read display
  • Cassette detection
  • Occlusion detection
  • Reliable and Durable
  • Programming flexibility
  • Air-­in-­Line detector with Off, High­ and Low­sensitivity settings
  • ON/OFF key allows pump to be put in a low-­power state to save battery life
  • Event memory of the last 1,000 events in the pump's history