Abbott Omni-Flow 4000 Plus

The Omni-Flow® 4000 Plus Pump I.V. Medication Management System is a stationary multi-channel pump with advanced software that manages and synchronizes the infusion of drugs through four channels that can be programmed for sequential or concurrent infusion.


The Omni­Flow® 4000 Plus Pump I.V. Medication Management System is a stationary multi­channel pump with advanced software that manages and synchronizes the infusion of drugs through four channels that can be programmed for sequential or concurrent infusion. Its patented multi­drug management capabilities promote the safe and on­time delivery of medication and reduce drug administration errors. The Omni-Flow System is widely used to administer complex drug therapy protocols, such as those for bone marrow transplantation, oncology and cardiac anesthesiology. The Omni­Flow 4000 Plus can improve overall nursing and clinical efficiency in a portable, versatile and dependable multi­channel device.

  • Concurrent flow with positive controls manages multiple medications freeing time spent setting up multiple single line systems
  • Intermittent programming up to 24 hours in advance for continuous and/or intermittent dosing so patients who may be in transit to other treatments will get their medications on time at the right time
  • Programmed delivery for maintenance of therapeutic blood levels is assured, vital with antibiotics and chemotherapy
  • Immediate infusion of medications and blood is possible when BMT patient's conditions suddenly change
    Physical:   Dimensions: 11.25” H x 12” W x 7.5” D 
  Weight: Approximately 14.5 lbs 
  Casing: High density polyurethane structural foam
  Pumping Mechanism: Piston diaphragm
Electrical:  Power Requirements: 120 VAC, 50/60 Hz, 50 W
  Fuses: .06 A, 250 VAC, Slo Blo
  AC Line Leakage: Less than 20 microamperes (μA)
  Power Cord Plug: Hospital grade (3 pin)
  Battery: 12 V, sealed lead­acid, rechargeable

Battery Life: Approximately 5 hours of operation at 125 mL/hr (low battery alarm activated with approximately 30 minutes of battery life remaining)

  Recharge Time: 24 hours with device turned off
  Nurse Call Jack: Standard 1⁄4 inch phone jack

External Communications: RS­232, DB­9 connector set to 9600 baud.
Note: RS­ 232 DB­25 connector not active on some models


Delivery Rate Range: 1.0 to 100 mL/hr in 0.1 mL increments up to 100mL then in 1 mL/hr increments from 100­700 mL (600 mL/hr maximum for 3­4 lines, 500 mL/hr maximum for single line with syringe)


Container Volume and Dose Range: 1.0 mL ­ 3000 mL in .1 mL increments up to 100 mL then in 1 mL increments from 100­ 3000 mL

  KVO Rate: Preset at 1.0 mL/hr Selectable from 1.0 mL ­99.9 mL per hour

Fluid Types: All standard IV fluids, including lipid emulsions, blood and packed cells

 Alarms: Cassette Unlocked
  Air In line/Upstream Occlusion
  Occlusion in Patient Line
  Possible Empty Container
  Low Battery Voltage
  Possible Faulty Cassette
  Callback Requested
  Device Failure/Service Required
  Unable to Pump at Programmed Rate
  Transfer to Battery Operation
  Communication Fault

The Omni­Flow 4000 Plus is a sophisticated device that precisely manages high-demand infusion requirements.

  • Consolidated delivery of up to four medications and one patient access site can help improve patient safety, nursing workflow and clinical precision
  • A single patient line reduces the need for multiple I.V. access sites and minimizes priming volume

  • A closed delivery system, for administering chemotherapy agents can reduce exposure for clinicians

  • A unique flush capability helps facilitate delivery of incompatible medications.